Rabu, 16 Maret 2011

Laptop Screen Repair at Home Alone

Tips on computer lovers this time talking about how to replace a laptop screen

The laptop screen is an essential component, the screen of the laptop needs to be handled with care and any damage to it, be it accidental dropping or sitting on the laptop by mistake can make it useless. The screen may crack or the internal connections may get rattled affecting the display. Sometimes the laptop screen goes black, without any reason. If you are experiencing similar problems, here are some ways to fix it


Demolition

The next step is to rid the screen of the laptop, to replace them with new ones. You try to observe the laptop monitor closely, you'll see that there is a small grommet. Small grommet usually made of plastic or rubber, it acts as a cover-loop to attach screws to the body of the laptop screen.
Now, remove the screws, using a Philips screwdriver, from the display assembly carefully, by turning it to the counter-clockwise direction. After all the screws removed, keep them safe and screw covers, to avoid misplacing them.
Getting rid of frames or panels of the screen carefully, by working your fingers around the frame to remove completely. If you experience problems while removing the bezel several fibers, using a small knife to unsnap the side and it will slide off easily.
Once you've pulled a frame-free screen display unit, the screen will actually look. Try tilting your little metal frame, the screen will come out. At the rear, you'll see two wires attached to the screen. This cable is the power cable and video cable. To completely remove the screen, you may have to unplug the second. Free screen broken from its shell and replaced with new ones.


Refixing

If you have to replace broken screen with a new one, it is time to fix the screw and the level of the display assembly back into position. Remembered for this, you must secure the screws in the appropriate port. Be careful while fixing the new screen for a laptop so it does not affect the clarity of the display. Once the screen has been installed, attach the panels to it and press on all four sides, so stay safe.

Reconnect

Connect the cable to the laptop and the battery pack again. After the power brick is plugged back, charge your laptop for sometime and then begin to check if you have completed the task correctly, and if the laptop is working properly and displaying clear. good luck friend,

These are some guidelines on the laptop screen repair. Make sure the spare parts are genuine and match the components your laptop if you plan to fix the laptop itself

Tidak ada komentar:

Posting Komentar